Single Phase SSR

Single Phase SSR

Discover our wide range of Single phase Solid State Relays :

  • our PCB mount SK range, available in various models ;
  • our SP-ST-SL range of interface relays,100% compatibles with electromagnetic relays with a 5mm width ;
  • our XK range of interface relays with integrated DIN rail adapters ;
  • our SE-SS range of I/O modules ;
  • our SF-SP7-SP8 range of miniature relays with FASTON or PCB terminals ;
  • our SCF in Hockey Puck design with FASTON connections ;
  • our SCFL-SON of EMC optimized relays ; 
  • our okpac® range (SO models) which combines innovation, performance and design in a Hockey Puck design;
  • our celpac® range (SA & SU models), 22.5mm pitch solution;
  • our SG4/SO4 phase angle controllers;
  • our power SOD & SILD SSRs with diagnostic features, etc.
loading
SP-ST-SL
SP-ST-SL celduc relais interface single phase relays are 100% compatible with 5mm wide electromechanical relays (EMR). They can be soldered directly on to PCBs or plugged into all types of DIN rail standard bases and support up to 5A in AC or DC versions.
SK
SK The SK series of celduc® relais offers PCB mount single phase solid state relays, in AC output models from 1 to 30A / 600-1600Vpeak. Adapted for motor and light control, electrovalves, resistive loads and heating elements applications, this series also exists in "ready to use" versions with built-in heatsinks.
XK
XK The XK range of single phase interface solid state relays with DIN rail included adapters can control loads such as resistors, LEDs, electrovalves, transformers and power contactor coils. They can also be supplied as dedicated motor control variants with 2 and 3-phase switching and motor rotation reversal. They are DIN-rail mounted and fitted with LEDs.
SE-SS
SE-SS celduc® relais offers an input/output module range with the models SE and SS.
SF-SP7-SP8
SF-SP7-SP8 celduc® relais offers miniature relays available with FASTON or PCB terminals.
SCF
SCF Single phase solid state relays with Faston terminals in a Hockey puck design (45mm wide). These relays are designed to control resistive loads.
SCFL-SON
SCFL-SON celduc® relais proposes a range of EMC optimized single phase solid state relays (with low electromagnetic emission – low RFI) with models SON and SCFL (version with FASTON terminals). The EMC optimized range proposes models allowing switching currents up to 20A, 50A or 75A, switching voltages up to 12-280VAC, 24-440VAC, 40-260VAC, or 50-480VAC and control voltages up to 4-30VDC, 5-30VDC or 6-32VDC.
SO7
SO7 With the models SO7, celduc® relais offers single phase random (instantaneous control) solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with voltage protection on input (transil) and output (RC and VDR) depending on the models.
SO8
SO8 With the models SO8, celduc® relais offers single phase zero-cross solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with Varistor protection (input and output).
SO9
SO9 With the models SO9, celduc® relais offers single phase zero-cross solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with voltage protection on input (transil) and output (TVS and VDR) depending on the models.
SOR9
SOR9 With the models SOR9, celduc® relais offers single phase zero-cross solid state relays for panel mount, with push-in terminals (springs). They are part of the okpac® series (Hockey Puck design).
SOR9 - "Ready to use" version
SOR9 - "Ready to use" version With the models SOR9, "ready to use" version with integrated heatsink, celduc® relais offers single phase zero-cross solid state relays for panel mount, with quick-connect terminals (push-in). They are part of the okpac® series (Hockey Puck design).
SA8
SA8 celduc® relais offers the SA8 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.
SA9
SA9 celduc® relais offers the SA9 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.
SAL9-SAM9
SAL9-SAM9 celduc® relais offers the SAL9 and SAM9 models. These models are the "ready to use" versions of the SA9 models, with built-in heatsinks. Designed for DIN Rail mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.
SU7
SU7 celduc® relais offers the SU7 models : single phase random solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.
SU8
SU8 celduc® relais offers the SU8 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.
SU9
SU9 celduc® relais offers the SU9 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.
SUL7-SUM7
SUL7-SUM7 celduc® relais offers the SUL7 and SUM7 models. These models are the "ready to use" versions of the SU7 models, with built-in heatsinks. These models are designed for motors AC-53 and inductive loads. They are also useful in phase angle control systems.
SUL8-SUM8
SUL8-SUM8 celduc® relais offers the SUL8 and SUM8 models. These models are the "ready to use" versions of the SU8 models, with built-in heatsinks. These models are designed for most types of loads.
SUL9-SUM9
SUL9-SUM9 celduc® relais offers the SUL9 and SUM9 models. These models are the "ready to use" versions of the SU9 models, with built-in heatsinks. These models are designed for resistive AC-1 loads.
SOL Flatpac
SOL Flatpac These flatpac SSRs are mainly designed for applications where a PCB is usually installed on the relay's control side. This product can also be used for applications where the wires are on the power side.
SOP
SOP The SOP relays are studied for the operation of transformer primaries and of all saturable inductive loads, avoiding the magnetising current points
SOD
SOD celduc relais offers a variety of relay diagnostic solutions. These relays let the user know the status of the load (resistive load), the relay output and the network.
SILD
SILD The SILD power SSRs with diagnostics is offered in a low profile housing with built-in heatsink.
SOI
SOI By applying or removing a voltage on the control input, the SOI relay switches or disconnects the current in the load. If the value of the load current is greater than the factory setting threshold, the current transformer included in the SOI will close the contact for signaling. It therefore indicates that a current is flowing in the load, then the user or the system interprets this status.
SLD-STD-SPD-SKLD-SCM-SOM
SLD-STD-SPD-SKLD-SCM-SOM DC MOSFET Solid State Relays are ideal for applications requiring transient overcurrent withstand (motors).
SKD-XKD-SCC
SKD-XKD-SCC DC Bipolar Solid State Relays are recommended for applications where a low control current is required.
SCI-SDI
SCI-SDI DC IGBT Solid State Relays are recommended for high voltage applications
SG4
SG4 These relays are designed to proportionally vary the switching point on a sinusoidal mains supply via an isolated analogue control signal thereby varying the RMS voltage at the terminals of the load.
SO4
SO4 Phase angle controller - okpac housing
SIL4-SIM4
SIL4-SIM4 Phase angle controller in a celpac® unit (ready to use). The microcontroller managing these controllers can adapt the function to your application. This range is mainly designed for resistive loads.
SG5-SWG5
SG5-SWG5 These controllers have an analog input isolated from the mains to proportionally vary the operating duty cycle of a heating element (heating element batteries).
SO3
SO3 Burst control mode controllers - This control mode is ideal for resistive loads that have a low thermal inertia, such as short wave infrared emitters (infrared heater bulbs).
SC7-SC8-SC9
SC7-SC8-SC9 Solid State Relays with 45mm housing - Previous generation
SN8
SN8 Relay designed for PCB applications and can control heavy loads in an ultra-miniature, physically compact package.
SKH20120 SKH20120 2

SKH20120

SKH20120
SSR 10A/12-280VAC/CTRL 8-32VDC/128A²S HEATSINK INCLUDED
Available
$82.37
View
SKH20240 SKH20240 2

SKH20240

SKH20240
SSR 10A/24-600VAC/CTRL 8-32VDC/450A²S HEATSINK INCLUDED
Available
$98.66
View
Picture Part Number Max. switching current (A) Max. switching voltage Control voltage Specifications Series Standards Availability (leadtime) Public unit price (excl. Taxes) Order Downloads
SK541101 SK541101 2.5A 24-280VAC 3-30VDC AC Zero cross output SK CE - EAC - UKCA
In stock
50 pcs
50 pcs - CELDUC Relais
84.05 $ Order
SKA20420 SKA20420 5A 12-275VAC 4-30VDC AC Zero cross output - with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
141 pcs
141 pcs - CELDUC Relais
49.03 $ Order
SKA20421 SKA20421 5A 12-275VAC 3-30VDC AC Random output -with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
451 pcs
451 pcs - CELDUC Relais
49.03 $ Order
SKA20440 SKA20440 5A 12-460VAC 4-30VDC AC Zero cross output - with output protection SK CE - EAC - UL (cURus) - UKCA
Out of stock
150 working day(s) (*) Create stock alert
57.84 $ Order
SKA20441 SKA20441 5A 12-460VAC 3-30VDC AC Random output -with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
3979 pcs
3979 pcs - CELDUC Relais
57.84 $ Order
SKA20460 SKA20460 5A 24-600VAC 5-30VDC AC Zero cross output SK CE - EAC - UKCA
In stock
113 pcs
113 pcs - CELDUC Relais
55.26 $ Order
SKA21441 SKA21441 5A 12-460VAC 7-30VDC AC Random output -with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
20 pcs
20 pcs - CELDUC Relais
71.96 $ Order
SKB20420 SKB20420 5A 12-280VAC 8-30VDC AC Zero cross output SK CE - EAC - UL (cURus) - UKCA
Out of stock
150 working day(s) (*) Create stock alert
29.23 $ Order
SKD10306 SKD10306 3A 2-60VDC 3-30VDC Bipolar transistor DC output SK CE - UKCA
Out of stock
150 working day(s) (*) Create stock alert
40.92 $ Order
SKH20120 SKH20120 10A 12-280VAC 8-32VDC AC Zero cross output - heatsink included SK CE - EAC - UL (cURus) - UKCA
In stock
1 pcs
1 pcs - CELDUC Relais
82.37 $ Order
SKH20240 SKH20240 10A 24-600VAC 8-32VDC AC Zero cross output - heatsink included SK CE - EAC - UL (cURus) - UKCA
In stock
101 pcs
101 pcs - CELDUC Relais
98.66 $ Order
SKL20120 SKL20120 16A 12-280VAC 8-32VDC AC Zero cross output SK CE - EAC - UL (cURus) - UKCA
In stock
37 pcs
37 pcs - CELDUC Relais
68.45 $ Order
SKL20220 SKL20220 21A 12-280VAC 8-32VDC AC Zero cross output SK CE - EAC - UL (cURus) - UKCA
In stock
128 pcs
128 pcs - CELDUC Relais
56.80 $ Order
SKL20240 SKL20240 22A 24-600VAC 8-32VDC AC Zero cross output SK CE - EAC - UL (cURus) - UKCA
In stock
27 pcs
27 pcs - CELDUC Relais
85.85 $ Order
SKL20241 SKL20241 25A 24-600VAC 8-32VDC AC Random output SK CE - EAC - UL (cURus) - UKCA
Out of stock
180 working day(s) (*) Create stock alert
85.85 $ Order
SKL20740 SKL20740 30A 24-600VAC 8-32VDC AC Zero cross output SK CE - EAC - UL (cURus) - UKCA
In stock
1 pcs
1 pcs - CELDUC Relais
223.38 $ Order
SKLD30520 SKLD30520 8A 12-100VDC 18-32VDC MOSFET transistor DC output SK CE - EAC - UKCA
In stock
148 pcs
148 pcs - CELDUC Relais
156.64 $ Order
SKLD31006 SKLD31006 10A 7-36VDC 7-30VDC MOSFET transistor DC output - with output protection SK CE - EAC - UKCA
Out of stock
180 working day(s) (*) Create stock alert
123.47 $ Order
* Non-contractual deadlines. Will depend on the requested quantity and our current business activity. For futher information, please fill up our contact form or contact a distributor nearby
Product added to wishlist
Product added to compare.