Your cartThere are no more items in your cart
Single Phase SSR
Discover our wide range of Single phase Solid State Relays :
- our PCB mount SK range, available in various models :
- our SO okpac® range which combines innovation, performance and design;
- our SA & SU celpac® range, 22.5mm pitch solution;
- our SG4/SO4 phase angle controllers;
- our power SOD & SILD SSRs with diagnostic features, etc.
SP-ST-SL SLA/SLD solid state relays are 100% compatible with 5 mm wide electromechanical relays. They can be soldered directly on to PCBs or plugged into all types of DIN rail standard bases.
SF-SP7-SP8 celduc relais offers Miniature Solid State Relays available with “FASTON” or PCB terminals.
SCFL-SON EMC optimized Solid State Relays - low RFI - EN50081-1. These relays are designed for use in applications where low electromagnetic emission is essentia
SA8 celduc celpac 2G range - 22.5mm pitch relay with screw connection - Zero-cross SSR designed for most types of loads
SA9 Here is our SA9 range of 22.5mm pitch solid state relay with screw connection - Zero-cross SSR designed for "resistive load"
SAL9-SAM9 celpac 2G range - 22.5mm pitch relay with screw connection - "Ready to use version" - Zero-cross SSR designed for "resistive load"
SU8 Here is celduc's SU8 range of Solid State Relays - 22.5mm pitch relay with pluggable connector - Zero-cross SSR
SU9 Single phase SSR - celpac 2G range - 22.5mm pitch relay with pluggable connector - Zero-cross SSR designed for "resistive load"
SUL7-SUM7 22.5mm pitch solid state relay with pluggable connector - "Ready to use version" - Random SSR
SUL8-SUM8 Single phase Solid State Relays - celpac 2G range - 22.5mm pitch relay with pluggable connector - "Ready to use version" - Zero-cross SSR
SUL9-SUM9 22.5mm pitch Solid State Relay with pluggable connector - "Ready to use version" - Zero-cross SSR designed for "resistive load"
SOL Flatpac These flatpac SSRs are mainly designed for applications where a PCB is usually installed on the relay's control side. This product can also be used for applications where the wires are on the power side.
SOP The SOP relays are studied for the operation of transformer primaries and of all saturable inductive loads, avoiding the magnetising current points
SOD celduc relais offers a variety of relay diagnostic solutions. These relays let the user know the status of the load (resistive load), the relay output and the network.
SLD-STD-SPD-SKLD-SCM-SOM DC Mosfet Solid State Relays are ideal for applications requiring transient overcurrent withstand (motors).
SKD-XKD-SCC DC Bipolar Solid State Relays are recommended for applications where a low control current is required.
SG4 These relays are designed to proportionally vary the switching point on a sinusoidal mains supply via an isolated analogue control signal thereby varying the RMS voltage at the terminals of the load.
SIL4-SIM4 Phase angle controller in a celpac® unit (ready to use). The microcontroller managing these controllers can adapt the function to your application. This range is mainly designed for resistive loads.
SG5-SWG5 These controllers have an analog input isolated from the mains to proportionally vary the operating duty cycle of a heating element (heating element batteries).
SO3 Burst control mode controllers - This control mode is ideal for resistive loads that have a low thermal inertia, such as short wave infrared emitters (infrared heater bulbs).
There are no products.