Single Phase SSR

Discover our wide range of Single phase Solid State Relays :

our PCB mount SK range, available in various models ;
our SP-ST-SL range of interface relays,100% compatibles with electromagnetic relays with a 5mm width ;
our XK range of interface relays with integrated DIN rail adapters ;
our SE-SS range of I/O modules ;
our SF-SP7-SP8 range of miniature relays with FASTON or PCB terminals ;
our SCF in Hockey Puck design with FASTON connections ;
our SCFL-SON of EMC optimized relays ;
our okpac® range (SO models) which combines innovation, performance and design in a Hockey Puck design;
our celpac® range (SA & SU models), 22.5mm pitch solution;
our SG4/SO4 phase angle controllers;
our power SOD & SILD SSRs with diagnostic features, etc.

SP-ST-SL celduc relais interface single phase relays are 100% compatible with 5mm wide electromechanical relays (EMR). They can be soldered directly on to PCBs or plugged into all types of DIN rail standard bases and support up to 5A in AC or DC versions.

SK The SK series of celduc® relais offers PCB mount single phase solid state relays, in AC output models from 1 to 30A / 600-1600Vpeak. Adapted for motor and light control, electrovalves, resistive loads and heating elements applications, this series also exists in "ready to use" versions with built-in heatsinks.

XK The XK range of single phase interface solid state relays with DIN rail included adapters can control loads such as resistors, LEDs, electrovalves, transformers and power contactor coils. They can also be supplied as dedicated motor control variants with 2 and 3-phase switching and motor rotation reversal. They are DIN-rail mounted and fitted with LEDs.

SE-SS celduc® relais offers an input/output module range with the models SE and SS.

SF-SP7-SP8 celduc® relais offers miniature relays available with FASTON or PCB terminals.

SCF Single phase solid state relays with Faston terminals in a Hockey puck design (45mm wide). These relays are designed to control resistive loads.

SCFL-SON celduc® relais proposes a range of EMC optimized single phase solid state relays (with low electromagnetic emission – low RFI) with models SON and SCFL (version with FASTON terminals). The EMC optimized range proposes models allowing switching currents up to 20A, 50A or 75A, switching voltages up to 12-280VAC, 24-440VAC, 40-260VAC, or 50-480VAC and control voltages up to 4-30VDC, 5-30VDC or 6-32VDC.

SO7 With the models SO7, celduc® relais offers single phase random (instantaneous control) solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with voltage protection on input (transil) and output (RC and VDR) depending on the models.

SO8 With the models SO8, celduc® relais offers single phase zero-cross solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with Varistor protection (input and output).

SO9 With the models SO9, celduc® relais offers single phase zero-cross solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with voltage protection on input (transil) and output (TVS and VDR) depending on the models.

SOR9 With the models SOR9, celduc® relais offers single phase zero-cross solid state relays for panel mount, with push-in terminals (springs). They are part of the okpac® series (Hockey Puck design).

SOR9 - "Ready to use" version With the models SOR9, "ready to use" version with integrated heatsink, celduc® relais offers single phase zero-cross solid state relays for panel mount, with quick-connect terminals (push-in). They are part of the okpac® series (Hockey Puck design).

SA8 celduc® relais offers the SA8 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.

SA9 celduc® relais offers the SA9 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.

SAL9-SAM9 celduc® relais offers the SAL9 and SAM9 models. These models are the "ready to use" versions of the SA9 models, with built-in heatsinks. Designed for DIN Rail mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.

SU7 celduc® relais offers the SU7 models : single phase random solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.

SU8 celduc® relais offers the SU8 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.

SU9 celduc® relais offers the SU9 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.

SUL7-SUM7 celduc® relais offers the SUL7 and SUM7 models. These models are the "ready to use" versions of the SU7 models, with built-in heatsinks. These models are designed for motors AC-53 and inductive loads. They are also useful in phase angle control systems.

SUL8-SUM8 celduc® relais offers the SUL8 and SUM8 models. These models are the "ready to use" versions of the SU8 models, with built-in heatsinks. These models are designed for most types of loads.

SUL9-SUM9 celduc® relais offers the SUL9 and SUM9 models. These models are the "ready to use" versions of the SU9 models, with built-in heatsinks. These models are designed for resistive AC-1 loads.

SOL Flatpac These flatpac SSRs are mainly designed for applications where a PCB is usually installed on the relay's control side. This product can also be used for applications where the wires are on the power side.

SOP The SOP relays are studied for the operation of transformer primaries and of all saturable inductive loads, avoiding the magnetising current points

SOD celduc relais offers a variety of relay diagnostic solutions. These relays let the user know the status of the load (resistive load), the relay output and the network.

SILD The SILD power SSRs with diagnostics is offered in a low profile housing with built-in heatsink.

SOI By applying or removing a voltage on the control input, the SOI relay switches or disconnects the current in the load. If the value of the load current is greater than the factory setting threshold, the current transformer included in the SOI will close the contact for signaling. It therefore indicates that a current is flowing in the load, then the user or the system interprets this status.

SLD-STD-SPD-SKLD-SCM-SOM DC MOSFET Solid State Relays are ideal for applications requiring transient overcurrent withstand (motors).

SKD-XKD-SCC DC Bipolar Solid State Relays are recommended for applications where a low control current is required.

SCI-SDI DC IGBT Solid State Relays are recommended for high voltage applications

SG4 These relays are designed to proportionally vary the switching point on a sinusoidal mains supply via an isolated analogue control signal thereby varying the RMS voltage at the terminals of the load.

SO4 Phase angle controller - okpac housing

SIL4-SIM4 Phase angle controller in a celpac® unit (ready to use). The microcontroller managing these controllers can adapt the function to your application. This range is mainly designed for resistive loads.

SG5-SWG5 These controllers have an analog input isolated from the mains to proportionally vary the operating duty cycle of a heating element (heating element batteries).

SO3 Burst control mode controllers - This control mode is ideal for resistive loads that have a low thermal inertia, such as short wave infrared emitters (infrared heater bulbs).

SC7-SC8-SC9 Solid State Relays with 45mm housing - Previous generation

SN8 Relay designed for PCB applications and can control heavy loads in an ultra-miniature, physically compact package.

Showing 1-7 of 7 item(s)

celduc 22,5mm pitch phase angle controller

SIL465000

32A/160-450Vac/Ctrl 0-10v

Available

$432.32

View

SIL465400

32A/160-450VAC/CTRL 4-20mA

Available

$461.45

View

SIM465000

40A/160-450Vac/Ctrl 0-10v

Available

$469.38

View

SKH10120

SSR 10A/12-280VAC/CTRL 4-14VDC/128A²S HEATSINK INCLUDED

Available

$82.37

View

SKH10240

SSR 10A/24-600VAC/CTRL 4-14VDC/450A²S HEATSINK INCLUDED

Available

$98.66

View

SKH20120

SSR 10A/12-280VAC/CTRL 8-32VDC/128A²S HEATSINK INCLUDED

Available

$82.37

View

SKH20240

SSR 10A/24-600VAC/CTRL 8-32VDC/450A²S HEATSINK INCLUDED

Available

$98.66

View

Part Number	Max. switching current (A)	Max. switching voltage	Control voltage	Specifications	Series	Standards	Availability (leadtime)	Public unit price (excl. Taxes)	Downloads
SIL465000	28A AC-1 @40°C	160-450VAC	0-10VDC	Phase angle controller - Single phase - with output protection	SIL4-SIM4	EAC - UKCA - CE	In stock 5 pcs 5 pcs - CELDUC Relais	432.32 $	Data-sheet Installation instructions CAD Files 2D 3D
SIL465400	28A AC-1 @40°C	160-450VAC	4-20mA	Phase angle controller - Single phase - with output protection	SIL4-SIM4	EAC - UKCA - CE	In stock 16 pcs 16 pcs - CELDUC Relais	461.45 $	Data-sheet Installation instructions CAD Files 2D 3D
SIM465000	35A AC-1 @40°C	160-450VAC	0-10VDC	Phase angle controller - Single phase - with output protection	SIL4-SIM4	EAC - UKCA - CE	In stock 7 pcs 7 pcs - CELDUC Relais	469.38 $	Data-sheet Installation instructions
SKH10120	10A	12-280VAC	4-14VDC	AC Zero cross output - heatsink included	SK	CE - EAC - UL (cURus) - UKCA	In stock 23 pcs 23 pcs - CELDUC Relais	82.37 $	Data-sheet CAD Files 2D 3D
SKH10240	10A	24-600VAC	4-14VDC	AC Zero cross output - heatsink included	SK	CE - EAC - UL (cURus) - UKCA	In stock 95 pcs 95 pcs - CELDUC Relais	98.66 $	Data-sheet CAD Files 2D 3D
SKH20120	10A	12-280VAC	8-32VDC	AC Zero cross output - heatsink included	SK	CE - EAC - UL (cURus) - UKCA	In stock 1 pcs 1 pcs - CELDUC Relais	82.37 $	Data-sheet CAD Files 2D 3D
SKH20240	10A	24-600VAC	8-32VDC	AC Zero cross output - heatsink included	SK	CE - EAC - UL (cURus) - UKCA	In stock 101 pcs 101 pcs - CELDUC Relais	98.66 $	Data-sheet CAD Files 2D 3D

* Non-contractual deadlines. Will depend on the requested quantity and our current business activity. For futher information, please fill up our contact form or contact a distributor nearby

Product added to wishlist

Product added to compare.