Single Phase SSR

Single Phase SSR

Discover our wide range of Single phase Solid State Relays :

  • our PCB mount SK range, available in various models ;
  • our SP-ST-SL range of interface relays,100% compatibles with electromagnetic relays with a 5mm width ;
  • our XK range of interface relays with integrated DIN rail adapters ;
  • our SE-SS range of I/O modules ;
  • our SF-SP7-SP8 range of miniature relays with FASTON or PCB terminals ;
  • our SCF in Hockey Puck design with FASTON connections ;
  • our SCFL-SON of EMC optimized relays ; 
  • our okpac® range (SO models) which combines innovation, performance and design in a Hockey Puck design;
  • our celpac® range (SA & SU models), 22.5mm pitch solution;
  • our SG4/SO4 phase angle controllers;
  • our power SOD & SILD SSRs with diagnostic features, etc.
loading
SP-ST-SL
SP-ST-SL celduc relais interface single phase relays are 100% compatible with 5mm wide electromechanical relays (EMR). They can be soldered directly on to PCBs or plugged into all types of DIN rail standard bases and support up to 5A in AC or DC versions.
SK
SK The SK series of celduc® relais offers PCB mount single phase solid state relays, in AC output models from 1 to 30A / 600-1600Vpeak. Adapted for motor and light control, electrovalves, resistive loads and heating elements applications, this series also exists in "ready to use" versions with built-in heatsinks.
XK
XK The XK range of single phase interface solid state relays with DIN rail included adapters can control loads such as resistors, LEDs, electrovalves, transformers and power contactor coils. They can also be supplied as dedicated motor control variants with 2 and 3-phase switching and motor rotation reversal. They are DIN-rail mounted and fitted with LEDs.
SE-SS
SE-SS celduc® relais offers an input/output module range with the models SE and SS.
SF-SP7-SP8
SF-SP7-SP8 celduc® relais offers miniature relays available with FASTON or PCB terminals.
SCF
SCF Single phase solid state relays with Faston terminals in a Hockey puck design (45mm wide). These relays are designed to control resistive loads.
SCFL-SON
SCFL-SON celduc® relais proposes a range of EMC optimized single phase solid state relays (with low electromagnetic emission – low RFI) with models SON and SCFL (version with FASTON terminals). The EMC optimized range proposes models allowing switching currents up to 20A, 50A or 75A, switching voltages up to 12-280VAC, 24-440VAC, 40-260VAC, or 50-480VAC and control voltages up to 4-30VDC, 5-30VDC or 6-32VDC.
SO7
SO7 With the models SO7, celduc® relais offers single phase random (instantaneous control) solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with voltage protection on input (transil) and output (RC and VDR) depending on the models.
SO8
SO8 With the models SO8, celduc® relais offers single phase zero-cross solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with Varistor protection (input and output).
SO9
SO9 With the models SO9, celduc® relais offers single phase zero-cross solid state relays for chassis mount. They are part of the okpac® series (Hockey Puck design). These relays are equipped with voltage protection on input (transil) and output (TVS and VDR) depending on the models.
SOR9
SOR9 With the models SOR9, celduc® relais offers single phase zero-cross solid state relays for panel mount, with push-in terminals (springs). They are part of the okpac® series (Hockey Puck design).
SOR9 - "Ready to use" version
SOR9 - "Ready to use" version With the models SOR9, "ready to use" version with integrated heatsink, celduc® relais offers single phase zero-cross solid state relays for panel mount, with quick-connect terminals (push-in). They are part of the okpac® series (Hockey Puck design).
SA8
SA8 celduc® relais offers the SA8 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.
SA9
SA9 celduc® relais offers the SA9 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.
SAL9-SAM9
SAL9-SAM9 celduc® relais offers the SAL9 and SAM9 models. These models are the "ready to use" versions of the SA9 models, with built-in heatsinks. Designed for DIN Rail mount, with integrated IP20 protection with a transparent protective cover and screw connection on the power side and the control side.
SU7
SU7 celduc® relais offers the SU7 models : single phase random solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.
SU8
SU8 celduc® relais offers the SU8 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.
SU9
SU9 celduc® relais offers the SU9 models : single phase zero-cross solid state relays for panel mount, with integrated IP20 protection with removable protective flap, screw connection on the power side and removable connector on the control side.
SUL7-SUM7
SUL7-SUM7 celduc® relais offers the SUL7 and SUM7 models. These models are the "ready to use" versions of the SU7 models, with built-in heatsinks. These models are designed for motors AC-53 and inductive loads. They are also useful in phase angle control systems.
SUL8-SUM8
SUL8-SUM8 celduc® relais offers the SUL8 and SUM8 models. These models are the "ready to use" versions of the SU8 models, with built-in heatsinks. These models are designed for most types of loads.
SUL9-SUM9
SUL9-SUM9 celduc® relais offers the SUL9 and SUM9 models. These models are the "ready to use" versions of the SU9 models, with built-in heatsinks. These models are designed for resistive AC-1 loads.
SOL Flatpac
SOL Flatpac These flatpac SSRs are mainly designed for applications where a PCB is usually installed on the relay's control side. This product can also be used for applications where the wires are on the power side.
SOP
SOP The SOP relays are studied for the operation of transformer primaries and of all saturable inductive loads, avoiding the magnetising current points
SOD
SOD celduc relais offers a variety of relay diagnostic solutions. These relays let the user know the status of the load (resistive load), the relay output and the network.
SILD
SILD The SILD power SSRs with diagnostics is offered in a low profile housing with built-in heatsink.
SOI
SOI By applying or removing a voltage on the control input, the SOI relay switches or disconnects the current in the load. If the value of the load current is greater than the factory setting threshold, the current transformer included in the SOI will close the contact for signaling. It therefore indicates that a current is flowing in the load, then the user or the system interprets this status.
SLD-STD-SPD-SKLD-SCM-SOM
SLD-STD-SPD-SKLD-SCM-SOM DC MOSFET Solid State Relays are ideal for applications requiring transient overcurrent withstand (motors).
SKD-XKD-SCC
SKD-XKD-SCC DC Bipolar Solid State Relays are recommended for applications where a low control current is required.
SCI-SDI
SCI-SDI DC IGBT Solid State Relays are recommended for high voltage applications
SG4
SG4 These relays are designed to proportionally vary the switching point on a sinusoidal mains supply via an isolated analogue control signal thereby varying the RMS voltage at the terminals of the load.
SO4
SO4 Phase angle controller - okpac housing
SIL4-SIM4
SIL4-SIM4 Phase angle controller in a celpac® unit (ready to use). The microcontroller managing these controllers can adapt the function to your application. This range is mainly designed for resistive loads.
SG5-SWG5
SG5-SWG5 These controllers have an analog input isolated from the mains to proportionally vary the operating duty cycle of a heating element (heating element batteries).
SO3
SO3 Burst control mode controllers - This control mode is ideal for resistive loads that have a low thermal inertia, such as short wave infrared emitters (infrared heater bulbs).
SC7-SC8-SC9
SC7-SC8-SC9 Solid State Relays with 45mm housing - Previous generation
SN8
SN8 Relay designed for PCB applications and can control heavy loads in an ultra-miniature, physically compact package.
Picture Part Number Max. switching current (A) Max. switching voltage Control voltage Specifications Series Standards Availability (leadtime) Public unit price (excl. Taxes) Order Downloads
celduc Miniature solid state relays faston SF541310 12A 12-280VAC 4-30VDC Single phase SSR - Zero cross - FASTON terminals SF CE - VDE - EAC - UL (cURus) - UKCA
In stock
523 pcs
523 pcs - CELDUC Relais
78.16 $ Order
miniature PCB SSR celduc SF542310 12A 12-280VAC 4-30VDC Single phase SSR - Zero cross - “PCB” pins SF CE - VDE - EAC - UL (cURus) - UKCA
Out of stock
150 working day(s) (*) Create stock alert
82.68 $ Order
celduc Miniature solid state relays faston SF546310 20A 12-280VAC 4-30VDC Single phase SSR - Zero cross - FASTON terminals SF CE - VDE - EAC - UL (cURus) - UKCA
Out of stock
150 working day(s) (*) Create stock alert
85.44 $ Order
SKA10420 SKA10420 5A 12-275VAC 2,5-10VDC AC Zero cross output - with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
1311 pcs
1311 pcs - CELDUC Relais
84.05 $ Order
SKA10440 SKA10440 5A 12-460VAC 2,5-10VDC AC Zero cross output - with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
327 pcs
327 pcs - CELDUC Relais
57.84 $ Order
SKA11440 SKA11440 5A 12-460VAC 3-10VDC AC Zero cross output - with output protection SK CE - UL (cURus) - UKCA
In stock
19 pcs
19 pcs - CELDUC Relais
71.96 $ Order
SKA20420 SKA20420 5A 12-275VAC 4-30VDC AC Zero cross output - with output protection SK CE - EAC - UL (cURus) - UKCA
In stock
141 pcs
141 pcs - CELDUC Relais
49.03 $ Order
SKA20440 SKA20440 5A 12-460VAC 4-30VDC AC Zero cross output - with output protection SK CE - EAC - UL (cURus) - UKCA
Out of stock
150 working day(s) (*) Create stock alert
57.84 $ Order
SKA20460 SKA20460 5A 24-600VAC 5-30VDC AC Zero cross output SK CE - EAC - UKCA
In stock
113 pcs
113 pcs - CELDUC Relais
55.26 $ Order
celduc SSR with faston terminals SP852120 12A 12-280VAC 4-32VDC Zero cross, "FASTON" terminals - with output protection SP7-SP8 CE - VDE - EAC - UL (cURus) - UKCA
In stock
9 pcs
9 pcs - CELDUC Relais
77.78 $ Order
SPA01420 SPA01420 4A 12-275VAC 4-16VDC AC output module SP-ST-SL CE - EAC - UKCA
In stock
31 pcs
31 pcs - CELDUC Relais
65.77 $ Order
SPA07420 SPA07420 4A 12-275VAC 12-30VAC/DC AC output module SP-ST-SL CE - EAC - UKCA
Out of stock
135 working day(s) (*) Create stock alert
55.13 $ Order
celduc relais SSA range SSA05320 3A 12-280VAC 3-8VDC AC output module I/O Modules EAC
Out of stock
189 working day(s) (*) Create stock alert
205.15 $ Order
solid state relays ST range celduc STA07220 2A 12-275VAC 12-30VAC/DC AC output module SP-ST-SL CE - EAC - UL (cURus) - UKCA
In stock
189 pcs
189 pcs - CELDUC Relais
54.47 $ Order
XKA20420 XKA20420 5A 12-275VAC 6-30VDC AC Zero cross output - for DIN rail mounting - with output protection XK CE - EAC - UKCA
Out of stock
170 working day(s) (*) Create stock alert
85.96 $ Order
XKA20420D XKA20420D 5A 12-275VAC 6-30VDC AC Zero cross output - for DIN rail mounting - with output protection XK CE - EAC - UKCA
Out of stock
189 working day(s) (*) Create stock alert
97.64 $ Order
XKA20420R XKA20420R 5A 12-275VAC 6-30VDC AC Zero cross output - for DIN rail mounting - with output protection XK CE - EAC - UKCA
In stock
5 pcs
5 pcs - CELDUC Relais
97.97 $ Order
XKA70420 XKA70420 5A 12-275VAC 15-30VAC/DC AC Zero cross output - for DIN rail mounting - with output protection XK CE - EAC - UKCA
Out of stock
170 working day(s) (*) Create stock alert
90.90 $ Order
XKA70440 XKA70440 5A 12-440VAC 12-30VAC/8.5-30VDC AC Zero cross output - for DIN rail mounting - with output protection XK UKCA - CE - EAC
In stock
24 pcs
24 pcs - CELDUC Relais
100.99 $ Order
XKA90440 XKA90440 5A 12-440VAC 150-240VAC/DC AC Zero cross output - for DIN rail mounting - with output protection XK CE - EAC - UKCA
Out of stock
189 working day(s) (*) Create stock alert
100.99 $ Order
XKH XKH20120 10A AC-1 @40°C 12-400VAC 10-32VDC AC Zero cross output - heatsink included XK CE - EAC - UKCA
In stock
12 pcs
12 pcs - CELDUC Relais
123.02 $ Order
* Non-contractual deadlines. Will depend on the requested quantity and our current business activity. For futher information, please fill up our contact form or contact a distributor nearby
Product added to wishlist
Product added to compare.